Fastwel CPB907 Mezzanine CPU Module

CPU: Intel Atom E6xxT™

• 0.6 / 1.6 GHz

• IA32 x86 core

• 32-bit memory bus

• Cache level 1: 32 KB

• Cache level 2: 512 KB

• Hyper-Threading (2 Threads)

• Intel SpeedStep

• Deep Power Down support

• SIMD Extension 2&3 (SSE2, SSE3, SSSE3)

Platform Controller Hub

• Intel EG20T

System memory

• DDR2-800 SDRAM, 512 / 1024 MB, soldered

Integrated graphics controller

• 400 MHz

• 2D / 3D accelerator

• Hardware video decoding (H.264, MPEG2, MPEG4, VC1, WMV9)

• Hardware video encoding (H.264, MPEG4, H.263)

• Two independent displays

• Video memory shared with system

Flash BIOS

• 2 MB, in-system modification

• Reserved (on carrier board) Integrated non-volatile memory

• 32 KB FRAM (SPI) for user data (CPB907-01/02 only)

• 8 KB FRAM (I2C) for configuration storage

• Batteryless operation: CMOS configuration parameters stored in FRAM (I2C) Flash-disk (CPB907-01 only)

• SATA interface

• 4 GB NAND flash (SLC)

• Read / write .

100 / 80 MB/s

• Built-in wear control and ECC

MicroSD socket

• SD, SDHC support, speed class 6

• Capacity up to 32 GB Real time clock (battery power supply from the carrier board) Hardware monitor

• CPU and module temperature monitor (–55…+125°С)

• Main power voltages monitoring

• External fan control Digital accelerometer (CPB907-01/02 only)

• Measurement of acceleration along 3 axes

• Resolution

8/14 bit (relative error is not rated)

• Programmed measurement range: ±2g / ±4g / ±8g

• Event definition: free fall, movement, shaking, change of space orientation

• Event interruptions generation.

COM ExpressR Type 10 connector signals

• 3 PCIe x1 (PCIe Spec.

Rev 1.0a), 2.5 Gb/s

• 6 USB 2.0 host ports

• 1 USB 2.0 client port

• 2 SATA II ports (1.5 Gbps Gen.

I & 3 Gbps Gen II) (1 port for CPB907-01)

• "LAN 0" port: Gbit Ethernet

• SPI port (External Boot)

• "LVDS Ch.

A" port: 18/24-bit, 1280×768 @ 60Hz

• DDI port: SDVO, 1920×1080 @ 50Hz

• LPC port (Spec.Rev.1.1)

• SMBus port (Spec.Rev.2.0)

• I2C port

• HD Audio port

• "Speaker Out" port

• SDIO port (shared with GPIO ports)

• RS-232 (CMOS 3.3V, 256 B FIFO, up to 4 Mbps)

• RS-232 (CMOS 3.3V, 64-byte FIFO, up to 1 Mbps) or CAN 2.0B Active (CMOS 3.3V, up to 1 Mbps) "RTC battery" port

• Pressure measurement from 50 to 115 kPa

• Conversion time: 1 ms

• Resolution: 0.15 kPa

• Standard measurement accuracy ±1 kPa (at the temperature from –20…+85°С, calibration during microchip manufacturing, relative error is not rated)

Watchdog timer

• Integrated in CPU – 1 µs… 10 min

OS compatibility

• Microsoft™ MS-DOS® 6.22, FreeDOS

• Linux 2.6

• QNX 6.5.x

• Microsoft™ Windows® CE 6.0

• Microsoft™ Windows® XP Embedded

• Microsoft™ Windows® 7 Embedded

Power voltage

• +4.75…+20.0 V (operation)

• +5 V ±5% (for standby mode only)

• Short circuit and overvoltage protection (up to 25 V)

• For module operation the main power supply voltage is sufficient Power consumption

• 9 W CPB907-01/-02 (operating mode, 12V @ 0.75A)

• 7.5 W for CPB907-03 (operating mode, 12V @ 0.62A)

• W (standby mode, 5W @ 0.2A).

Operating temp.range

–40…+85°C Humidity:

• 5…95%, at +25°С, noncondensing

Shock / vibration stability

• 50g / 5g

MTBF

• 200 000 hours 、

Dimensions

• Max 55.0 × 84.0 × 15.0 mm (without heat spreader / heatsink)

Overall Height with cooling system (excluding COM Express connector):

• 13.0 mm (heat spreader is installed, corresponds to COM Express v2.1)

• 15.0 mm (heatsink with fins is installed)

Weight

• 40 g max

Weight with cooling system

• No more than 125 g (heat spreader is installed)

• No more than 145 g (heatsink with fins is installed)